Mekugi Nuki

[PNSSHOGUN]

Pipe scraper?

[Bugyotsuji]

Although the square cross-section handles are similar, the heads are different. The key may well be in the word scraper. What does a pipe scraper do?

 

(Mine is probably a seam marker for cloth.)

 

Among the possibilities that did cross my mind, if there was to be any connection with swords,  was a sort of vellum scraper, for wet same' handle wraps. Lastly I wondered if it was to be used as a tapper block under a wooden mallet, for removing very tight tsuka from shira-saya.(?)

[Baka Gaijin]

On the modern dual thread mekugi nuki, a simple application of a thread locking gel to the part that goes into the hammer head sorts the issue out.

[b.hennick]

You can use Loctite. Loctite red needs heat as well as tools to break the lock.

[PNSSHOGUN]

7 hours ago, Bugyotsuji said:

Although the square cross-section handles are similar, the heads are different. The key may well be in the word scraper. What does a pipe scraper do?

 

(Mine is probably a seam marker for cloth.)

 

Among the possibilities that did cross my mind, if there was to be any connection with swords,  was a sort of vellum scraper, for wet same' handle wraps. Lastly I wondered if it was to be used as a tapper block under a wooden mallet, for removing very tight tsuka from shira-saya.(?)

Pipe scrapers remove excess tar, carbon and other build up from the bowl of a pipe. Japanese tobacco pipes had quite small bowls, I doubt it really is the specific use for it but might be along those lines.

[Geraint]

Dear All.

 

A confession of sorts.  Many years ago, (pre internet if you can believe such a time existed), I decided to make my own mekugi nuki.  All I had to go on was an illustration in Stone's Glossary so off I went.  Found some nice brass and built my own, threaded punch and all. It turned out well and I was quite pleased with myself.  It was some years before I came across another Japanese one and realised that mine was a bit of a beast.  It is beside a conventional one in the photo and you can probably see it's more appropriate for cracking coconuts than getting the mekugi out.  However I have to say I have yet to come across a mekugi that can resist it!  😀  One or two visiting collectors have blanched a little when I get it out to dismantle their sword.

 

 

All the best.

 

[Bugyotsuji]

George, I am beginning to think your *object above may be for removing stuck shira-saya Tsuka, for a quick tap of a wooden mallet.(?) *Ah, but see Jean C below!

 

Today I discovered another mekugi-nuki, with a date on it, (乙亥 Kinoto-i, the same year as Waterloo, 1815) and possibly the maker/owner’s name. (Sasaki?)

 

 

 

[ROKUJURO]

I could image these "scrapers" (which they are certainly not) to be intended for pushing the TSUKA-ITO to the side (and reposition it after the process) in case it blocks the access to the MEKUGI.

Piers' MEKUGI-NUKI in the last post has a flattened handle end, and I think it could be meant for the same purpose.

[b.hennick]

I have two made from sword tangs. I bought them years ago at a sword show in Chicago. Like the tang itself the mekugi nuki was made in Japan.

 

The smaller one has a maru mune. Both are from koto blades.

[Rich S]

Barry

 

Most mekugi nuki I've seen are either bamboo or brass (both softer the steel). I was wondering if yours made of steel might scratch the mekgui ana or the sword nakago? Neat idea if safe to use.

[b.hennick]

I have used these for 8-10 years. No issues have occurred. Peg removal is a pretty gentle thing. 

[Bugyotsuji]

I never did manage to find out how to read Mr Sasaki’s lower name.

Can anyone help? Thanking you in advance! 

[Bugyotsuji]

姓? Could it be something as simple as ‘sei’?