equ Posted August 12, 2020 Report Posted August 12, 2020 Up for sale is an exceedingly rare and highly collectible Muramasa wakizashi sword with NBTHK authentication, this is a uniquely rare beauty sword. These are one of the most collectible of all sword as it does rarely comes up for sale but unfortunately have to put it up to go to a new home. The blade is signed Muramasa and the sword is in excellent condition, Muramasa blade in Shirasaya mountings. The cutting edge is unbelievably sharp as this is by far the sharpest. More on the sword condition: forging grain, no openings, no blister, no forging flaws, no bend, no nick and no crack. Blade has all of the characteristics you would expect to see with the Muramasa blade and The blade is unconditionally guaranteed to not have any fatal flaws and/or hagire. Overall a rare and desirable wakizashi Asking price for this sword is USD$12500 but I'm Open to reasonable offers. For all inquiries, contact me via PM or email equipments at protonmail dot com Thanks for looking! 1 Quote
Brian Posted August 12, 2020 Report Posted August 12, 2020 Wow. Where to start..... You aren’t going to sell a $12k sword here without at least an intro and details such as where you are and decent references. With a description straight from Showa22 I think, and old papers, we really expect more effort. Why wasn’t it submitted for new papers? 9 1 Quote
kodachi Posted August 12, 2020 Report Posted August 12, 2020 This blade started it's journey some time ago on nihonto.com.au Has been listed several times on ebay... And has been sold for 8000 USD the last time... Was discussed repeatedly on the message board... All together: doubtful mei, not "typical" hamon, "old" papers... I would be interested in the attribution the N(B)THK would give if the mei is removed ;) Best 1 Quote
Kawa Posted August 12, 2020 Report Posted August 12, 2020 Well if the mods made certain fields mandatory (esp measurements in writing and translations on papers) this would be a lot more honest Quote
Jean Posted August 12, 2020 Report Posted August 12, 2020 If interested, is it so difficult to ask?😀 2 Quote
Babu Posted August 12, 2020 Report Posted August 12, 2020 Well you all know I'm backing Kawa and Brian here but I'll say no more. Quote
Kawa Posted August 12, 2020 Report Posted August 12, 2020 Ah Jean seriously man, there is a reason you shouldn't have to go private in these circumstances and a reason the NMB is losing so many good voices. Get real please 1 Quote
kodachi Posted August 12, 2020 Report Posted August 12, 2020 Concerning the "interest": I "tried" to buy this blade some months ago as a gimei blade. If I would have been successful, I would have had a try for new papers - but seriously I wouldn't have had hope to get them. If it had failed, I would have kept the blade as a healthy nice wakizashi as a gimei example or would have removed the mei and would have had another try. It happened in the past, that after removing the (gi)mei the blade was attributed to the smith the blade was signed before... Would have been an interesting project Why didn't it work? Because the previous owner didn't accept my offer (about 4000 USD - very generous for an expected gimei I think ;)) Since I have now answered this question, although the answer was obvious before, I want to see my commentary as what it is... just some thoughts on the sellers post Quote
parfaitelumiere Posted August 13, 2020 Report Posted August 13, 2020 Put some wax or resin on the mei area, leaving all the characteristics visible except the mei, the material could be removed using solvant or alchool. Then you send to be submitted again, saying not to remove the resin or material you added. Quote
C0D Posted August 13, 2020 Report Posted August 13, 2020 26 minutes ago, parfaitelumiere said: Put some wax or resin on the mei area, leaving all the characteristics visible except the mei, the material could be removed using solvant or alchool. Then you send to be submitted again, saying not to remove the resin or material you added. Did you try this procedure before? Quote
Brian Posted August 13, 2020 Report Posted August 13, 2020 12 hours ago, Kawa said: Well if the mods made certain fields mandatory (esp measurements in writing and translations on papers) this would be a lot more honest Ray, Mainly because of the spinal surgery, I am unable to sit at the pc for longer than 2-3 minutes and I type with one hand on the table stopping the back from compressing. So when I am fit again, I'll get that done. Even this post took 10 minutes Quote
Babu Posted August 14, 2020 Report Posted August 14, 2020 Could I ask if it were normal to respond to an advert for a $12500 item to an encrypted untraceable mailbox in Switzerland ? For $12500 I'd want a face to face to inspect the item pre purchase . No matter how genuine the seller might appear once your moneys transfered your on your own. If you wanted to return it, even if it did arrive, where might you stand enforcing this? Just curious really. Quote
mtexter Posted August 14, 2020 Report Posted August 14, 2020 On 8/13/2020 at 4:17 AM, Brian said: Ray, Mainly because of the spinal surgery, I am unable to sit at the pc for longer than 2-3 minutes and I type with one hand on the table stopping the back from compressing. So when I am fit again, I'll get that done. Even this post took 10 minutes Brian, I am curious, do you have a smartphone? If so, I'd strongly suggest using speech-to-text to reply to posts. It might change your life for the near future! Thank you so much for everything you do. I hate the thought of you suffering 4 Quote
Babu Posted August 14, 2020 Report Posted August 14, 2020 Now that would be interesting! A phone autocorrecting speech from a man in discomfort and pain. 😂 1 Quote
parfaitelumiere Posted August 15, 2020 Report Posted August 15, 2020 I put some warnish on copper for partial gold plating, easy to remove, no damage. You can find something thick enough, or even cut a board shape and put in place using nail warnish or so, this way all will be easy to remove. I can make attempt on one blade and let you know. Quote
16k Posted August 15, 2020 Report Posted August 15, 2020 1 hour ago, parfaitelumiere said: I put some warnish on copper for partial gold plating, easy to remove, no damage. You can find something thick enough, or even cut a board shape and put in place using nail warnish or so, this way all will be easy to remove. I can make attempt on one blade and let you know. I’d be interesting in seeing that because I don’t quite understand the process Quote
C0D Posted August 15, 2020 Report Posted August 15, 2020 Would be more interested to know if NBTHK would judge it as mumei or not Quote
16k Posted August 18, 2020 Report Posted August 18, 2020 1 minute ago, YOJIMBO said: this one failed by nbthk , gimei although I’m not surprised at all, how did you happen to know that? Quote
Hoshi Posted August 18, 2020 Report Posted August 18, 2020 You can't just varnish away a mei and assume the NBHTK will look elsewhere and return a papered sword. Imagine what happens when you remove your varnish: sword is both mumei (on paper) and zai (in reality). I don't know where this idea comes from but it's one that needs to go straight to the dustbin. As for this gimei sword, if someone studies the post history of the owner, I'm not even convinced its a real person. Not clear what's going on here, but I have a feeling the fraudulent scheme extends beyond the gimei + green paper combo. 4 Quote
Babu Posted August 18, 2020 Report Posted August 18, 2020 On 8/14/2020 at 8:52 PM, Babu said: Could I ask if it were normal to respond to an advert for a $12500 item to an encrypted untraceable mailbox in Switzerland ? As I said here it's not quite in my comfort zone deal wise albeit I'm not historically good at deals anyway Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.