Michael 67 Posted April 26, 2019 Report Posted April 26, 2019 Hi, I found this little wakizashi. How can I remove the old solid fat without breaking anything? How do I get the blade from the tsuka? I think that the blade is glued with fat in the Tsuka. I'm grateful for your help. Michael Quote
seattle1 Posted April 26, 2019 Report Posted April 26, 2019 Hello: You might try putting a block of wood against the tsuka at the habaki juncture and hammering it smartly, being careful to avoid hitting the blade or habaki. You stand a good chance of the blade moving out of the tsuka. Arnold F. 1 Quote
Stefan Posted April 26, 2019 Report Posted April 26, 2019 Ich schreibe das mal auf Deutsch. einfach Spiritus, Küchentücher und viel Geduld Gruß Stefan Quote
ROKUJURO Posted April 26, 2019 Report Posted April 26, 2019 Michael,if it is indeed old grease, then any solvent (isopropylic alcohol or acetone) will clean the surface without any harm to the steel. Removing the TSUKA should be no problem, if there was grease or wax involved. Take a piece of wood and place it on the TSUKA (not on the wooden HABAKI!). Tapping with a wooden (or plastic) mallet should cause the TSUKA to come free.I once had a similar problem, but in my case, the TSUKA was glued with epoxy to the NAKAGO. There was no other way, I had to destroy the TSUKA to get it off. Good luck! Quote
Michael 67 Posted April 26, 2019 Author Report Posted April 26, 2019 Thanks for the quick answers to my questions. I'll send photos when I'm finished. Quote
Surfson Posted April 26, 2019 Report Posted April 26, 2019 I agree with Jean. I keep a bottle of acetone handy, and it cuts grease like this wonderfully without affecting the steel. In fact, many times I have obtained swords with some staining from dried choji oil, and acetone with a Q-tip removes it completely. Just be sure to do it in a well ventilated area and don't touch the solvent with your skin. 1 Quote
Michael 67 Posted April 26, 2019 Author Report Posted April 26, 2019 so, now the blade is almost completely clean. Thanks for the tip with the wood to remove the Tsuka. There is no signature. Do you have an idea what period and what school that can be. Sorry for the bad photos Michael Quote
Jason N Posted April 27, 2019 Report Posted April 27, 2019 so, now the blade is almost completely clean. Thanks for the tip with the wood to remove the Tsuka. There is no signature. Do you have an idea what period and what school that can be. Sorry for the bad photos Michael I cannot comment on the period or school, but to me, it has an appealing form and the blade appears to be quite healthy. Nice find. ???? Quote
Bazza Posted April 27, 2019 Report Posted April 27, 2019 The nakago jiri (tang end) would suggest a Kaga province blade, possibly a kazuuchimono from the 1500s, but that would need someone knowledgeable to look at "in the hand". BaZZa. Quote
Surfson Posted April 27, 2019 Report Posted April 27, 2019 I agree Bazza, that was my thought too. Quote
ROKUJURO Posted April 30, 2019 Report Posted April 30, 2019 No, not KATASOGI NAKAGO (KAGA), but IRIYAMAGATA JIRI. MEKUGI ANA looks drilled, not punched. Better photos are needed which are not shot in an angle. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.